Cellulose Insulation Guide

Quick answer

Cellulose insulation is a blown‑in material made mostly from recycled paper treated with fire‑retardant chemicals. It is installed in attics and wall cavities to improve thermal performance and air sealing. Spray Foam Kings offers professional cellulose installation across the GTA and provides a free, written quote for every job.

Get a free written quote from Spray Foam Kings.

Call 647-641-6881

What is cellulose insulation?

Cellulose is a loose‑fill insulation that is pumped into cavities using specialised equipment. The material is composed of 85 % recycled newspaper, 10 % sand, and 5 % fire‑retardant additives that meet Canadian fire‑safety standards. Because it fills every gap, it reduces drafts and heat loss more consistently than batts.

Where it works best

  • Attic floors and slopes – blown‑in cellulose settles into the joist bays, creating a continuous thermal barrier.
  • Wall cavities – after drywall removal or during new construction, cellulose can be blown into studs for a seamless fill.
  • Retrofit projects – when existing insulation is removed, cellulose provides an easy way to upgrade without major demolition.

Benefits of cellulose insulation

  • High recycled content – reduces waste and supports sustainable building practices.
  • Good thermal performance – typical R‑value of about R‑3.5 per inch, comparable to fiberglass batts.
  • Air‑sealing – the loose‑fill nature blocks air movement, helping to lower heating and cooling costs.
  • Sound dampening – dense fibres absorb sound, improving indoor acoustic comfort.
  • Fire‑resistant – treated with fire‑retardant chemicals to meet Canadian fire codes.

How cellulose compares with spray foam

Feature Cellulose (blown‑in) Open‑cell spray foam Closed‑cell spray foam
R‑value per inch ~R‑3.5 R‑3.7 R‑6
Air‑sealing ability Good (fills gaps) Excellent (creates airtight membrane) Excellent
Vapor control Requires separate vapor barrier where required Breathable; vapor barrier added if needed Acts as class‑II vapor retarder at 2 in+
Moisture resistance Resists mould when dry; can settle if wet Closed‑cell resists water; open‑cell can absorb moisture Highly water‑resistant
Typical cost (per sq ft) Quote‑based (see below) $1.50–$3.50 (open‑cell) $2.50–$5.00 (closed‑cell)
Installation time 4–6 hours for a 1 200 sq ft attic 4–6 hours for similar area 4–6 hours for similar area

Cost considerations for cellulose insulation

Factor Why it matters Price
Square footage Larger areas require more material and longer pump time. Quote‑based
Depth of fill Higher R‑values need deeper installation, increasing material use. Quote‑based
Existing insulation removal Removal of old fiberglass or cellulose adds labour and disposal fees. ~$400–$800 for 1 200 sq ft (see attic removal pricing)
Access difficulty Tight crawl spaces or limited attic access can add set‑up time. Quote‑based
Rebate eligibility Enbridge HER+ rebates can offset up to $10 600; Spray Foam Kings handles paperwork. Depends on rebate

Installation process

Assessment > Removal of existing insulation (if needed) > Preparation and sealing of work area > Blowing in cellulose to target depth > Cleanup and re‑occupancy

Key factors to evaluate

R‑value — determines thermal resistance; Air sealing — reduces drafts and energy loss; Moisture control — prevents mould and degradation; Fire rating — ensures compliance with safety standards; Rebate potential — can lower overall project cost.

Frequently asked questions

What is the 2/3 rule of insulation?

The 2/3 rule suggests that insulation should fill at least two‑thirds of the cavity depth to achieve effective thermal performance and minimise air gaps. Cellulose, being a loose‑fill material, naturally conforms to this rule when installed to the recommended depth.

How much does 1 000 sq ft of insulation cost?

Cellulose pricing is provided as a written, itemised quote based on the specific project details. Factors such as cavity depth, existing insulation removal, and access difficulty influence the final amount. Contact Spray Foam Kings for a free estimate.

What does an insulation contractor do?

An insulation contractor assesses the building envelope, recommends suitable insulation types, removes any existing material, installs the new insulation (blown‑in, spray foam, or batts), ensures proper ventilation and vapor control, and cleans up the work area. Spray Foam Kings follows this workflow and also assists with government rebate paperwork.

What is the best insulation for my basement?

For basements, closed‑cell spray foam provides superior moisture resistance and acts as a class‑II vapor retarder at 2 inches or more. However, if you prefer a blown‑in solution, cellulose can be installed in wall cavities after proper vapor‑barrier placement. A professional assessment will determine the most appropriate option for your specific conditions.

What insulation is made in Canada?

Spray Foam Kings supplies products that are BASF Spray Foam certified and meet Canadian standards. While cellulose is primarily made from recycled newspaper sourced internationally, the fire‑retardant additives and installation equipment comply with Canadian regulations.

What is faced insulation?

Faced insulation refers to batts that have a paper or foil facing attached to act as a vapor barrier. Cellulose is a loose‑fill product and does not have a facing; instead, a separate vapor barrier may be installed where required by the Ontario Building Code.

Can I claim rebates for cellulose insulation?

Yes. As a registered Enbridge Home Efficiency Rebate Plus (HER+) partner, Spray Foam Kings can process rebates up to $10 600 for eligible upgrades, including cellulose insulation when it meets the program criteria. The company handles all paperwork and submits the claim on your behalf.

How long does it take to install cellulose in an attic?

A typical 1 200 sq ft attic takes about 4–6 hours on‑site, including set‑up, blowing in the material, and cleanup. Larger or more complex spaces may require additional time.

When can I move back into the home after cellulose installation?

Standard re‑occupancy is 24 hours after the installation is complete, with windows open and ventilation running. This allows any residual dust to clear and ensures the material has settled properly.

Are you licensed, insured, and WSIB compliant?

Yes. Spray Foam Kings carries $5 000 000 in commercial general liability insurance, all crew members are WSIB‑covered, and installers are CUFCA‑trained, meeting the national standard for spray polyurethane foam and related insulation work.

For more information on rebates, attic insulation costs, or how spray foam compares to batts, see these pages:

Get a free written quote from Spray Foam Kings.

Call 647-641-6881

Last updated November 17, 2026.

Serving: Toronto • Mississauga • Etobicoke • Scarborough • Vaughan • Markham • Newmarket • Richmond Hill • Oshawa • Ajax • Pickering • Aurora • North York • Brockville • Kingston • Ottawa • Brampton
-->
CUFCA Licensed Contractor · View our CUFCA member profile
Serving: Toronto • Mississauga • Etobicoke • Scarborough • Vaughan • Markham • Newmarket • Richmond Hill • Oshawa • Ajax • Pickering • Aurora • North York • Brockville • Kingston • Ottawa • Brampton
Scroll to Top
Call Now Button