Spray Foam Insulation in Toronto & Ontario

Residential, commercial, and industrial spray foam insulation services designed to improve energy efficiency, comfort, and long-term performance across the GTA and Ontario.

Name
Tell us about your project. (area, location, timeline)

Spray Foam Kings Quick Facts

Open-cell spray foam$1.50–$3.50 per sq ft installed · R-3.7 per inch
Closed-cell spray foam$2.50–$5.00 per sq ft installed · R-6 per inch
Example1,200 sq ft attic at R-20: $2,800–$4,200 open-cell / $6,000–$8,400 closed-cell
Training & certificationCUFCA-trained installers · BASF Spray Foam certified · Caliber Spray Foam licensed
Insurance$5,000,000 commercial general liability · all crew WSIB-covered
CodeOntario Building Code SB-12 compliant on every install
WarrantyWorkmanship warranty — delamination, shrinkage or adhesion failures repaired at no charge
Re-occupancy24 hours minimum with ventilation (24–48 hours for whole-home installs)
RebatesRegistered Enbridge HER+ partner — up to $10,600; we handle the paperwork
Experience10,000+ projects completed
FireproofingNFCA certified (industrial SFRM) · CAFCO 300 & ISOLATEK certified dealers
QuotesFree, written and itemised before scheduling

Our Spray Foam & Fireproofing Insulation Services across Ontario

🧮

Free Spray Foam Insulation Cost Calculator

Get instant pricing estimates for your Ontario property. Calculate costs for attic, basement, walls, and more in under 60 seconds.

✓ Instant pricing estimates
✓ Open-cell vs closed-cell comparison
✓ Ontario rebate information included
Calculate Your Cost Now →

No email required • Free to use • Instant results

WHY CHOOSE US

Trusted Spray Foam & Insulation Experts

Energy-Efficient Solutions

Our spray foam insulation reduces air leakage, improves comfort, and lowers long-term energy costs.

Licensed & Insured

Fully certified spray foam installers with strict safety and building-code compliance.

Residential & Commercial Experts

From homes and basements to large commercial and industrial buildings, we handle projects of all sizes.

Trusted By & Certifications

Spray foam kigns is NFCA certified
spray foam kings is CAFCO 300 & ISOLATEK certified dealers

Request Your Free Spray Foam Insulation Quote

Licensed & Insured for Commercial Projects

Spray Foam Kings is a fully licensed and insured spray foam insulation contractor serving Toronto and Ontario. We carry $5,000,000 in commercial general liability insurance and all crew are WSIB-covered, for larger commercial, industrial, and institutional projects.

Our team meets site requirements for general contractors, property managers, developers, and facility operators across residential, commercial, and industrial builds. Spray Foam Kings provides professional spray foam insulation services across Toronto, including North York, Scarborough, and East York.

Bonded commercial spray foam insulation contractor in Toronto

Spray Foam Insulation FAQs – Toronto & Ontario

How much does spray foam insulation cost in Toronto?

Spray foam insulation in Toronto: Open-cell costs $1.50–$3.50 per sq ft installed and closed-cell $2.50–$5.00 per sq ft installed. A typical 1,200 sq ft attic at R-20 runs $2,800–$4,200 with open-cell or $6,000–$8,400 with closed-cell. Small areas typically cost $1,500–$3,000, medium projects $3,000–$5,000, and full-home jobs $10,000–$20,000+. Every project gets a free, written, itemised quote.

Open-cell provides R-3.7 per inch and suits attic floors and interior wall cavities. Closed-cell provides R-6 per inch, acts as a class-II vapour retarder at 2 inches or more, and is required for below-grade walls, rim joists, crawl spaces and flat roofs. Closed-cell costs roughly 40–50% more.

Closed-cell foam at 2 inches or more acts as a class-II vapour retarder under the Ontario Building Code. Open-cell foam does not; a separate vapour barrier is needed where code requires one.

After a minimum of 24 hours with windows open and ventilation running; allow 24–48 hours for whole-home installs. Once fully cured, spray foam is chemically inert.

25–30+ years under normal conditions, without sagging, settling or absorbing moisture. Our workmanship warranty covers delamination, shrinkage and adhesion failures.

Yes. We carry $5,000,000 in commercial general liability insurance, all crew are WSIB-covered, and every installer is CUFCA-trained.

Yes, as a separate quoted item — about $400–$800 for a 1,200 sq ft attic depending on depth and access. If vermiculite is present, licensed asbestos abatement is required first, and we pause the project until it’s done.

Yes. Spray Foam Kings is a registered Enbridge Home Efficiency Rebate Plus (HER+) partner; rebates can reach $10,600 depending on upgrades. We handle the paperwork, and HER+ rebates typically arrive 4–8 weeks after the post-install inspection.

A typical 1,200 sq ft open attic floor takes 4–6 hours on site, including setup, spraying and cleanup.

SFRM is a spray-applied fire-resistive material used on commercial and industrial structures. Spray Foam Kings is NFCA certified for fireproofing and a certified CAFCO 300 and ISOLATEK dealer, with fire ratings of 1–4 hours. See our fireproofing services in Toronto.

Request Your Quote Now

Call Us (647) 641-6881

Spray Foam Insulation Tips, Guides & Insights

Spray Foam Insulation Prices

Pricing is calculated per square foot of installed area and varies with foam type, thickness and site conditions. Typical rates are:

Foam typeInstalled cost (CAD)Example – 1 200 sq ft attic at R‑20
Open‑cell$1.50 – $3.50 / sq ft$2 800 – $4 200
Closed‑cell$2.50 – $5.00 / sq ft$6 000 – $8 400

Other common jobs:

  • Rim‑joist insulation (closed‑cell) – $800 – $1 500.
  • Attic insulation removal – $400 – $800 for a 1 200 sq ft area (depends on depth and access).

Small residential jobs typically fall between $1 500 – $3 000, medium projects $3 000 – $5 000, and full‑home installations $10 000 – $20 000+.

All customers receive a free, written, itemised quote before any work begins.

How a Spray Foam Project Works

  1. Free, written quote – We assess the space, discuss performance goals and provide an itemised estimate before any work is scheduled.
  2. Preparation – Old fiberglass or cellulose is removed when needed, as a separate quoted item. If vermiculite is present, licensed asbestos abatement is required first and we pause the project until it is complete. HVAC equipment, electrical panels and flooring access points are covered with plastic sheeting before any application begins.
  3. Application – CUFCA-trained installers spray the foam to the specified thickness. Closed-cell foam at 2 inches or more also acts as a class-II vapour retarder.
  4. Re-occupancy – Re-occupancy after a minimum of 24 hours with ventilation (24–48 hours for whole-home installs).
  5. Final check & paperwork – We check the installation and, if applicable, handle your Enbridge HER+ rebate paperwork. Work is backed by a workmanship warranty covering delamination, shrinkage and adhesion failures at no charge.

A typical 1,200 sq ft open attic floor takes 4–6 hours on site.

What We Insulate

Spray Foam Kings installs both open‑cell and closed‑cell spray polyurethane foam in residential, commercial and industrial buildings across the Greater Toronto Area and throughout Ontario.

  • Attic floors, slopes and cathedral ceilings – open‑cell for interior floor cavities, closed‑cell for flat‑roof applications.
  • Basements, crawl spaces and rim joists – closed‑cell provides air‑sealing, moisture control and mould resistance.
  • Exterior walls and below‑grade foundations – closed‑cell meets the Ontario Building Code requirement for a class‑II vapour retarder when applied at 2 inches or more.
  • Flat roofs – roofing spray foam that insulates and waterproofs in a single application.
  • Industrial fireproofing (commercial and industrial projects only) – spray-applied fire-resistive material (SFRM); NFCA certified for fireproofing, CAFCO 300 and ISOLATEK products, fire ratings of 1–4 hours. See fireproofing services in Toronto.

Spray foam insulation is performed by CUFCA-trained, WSIB-covered installers.

Service Areas & Contact

Spray Foam Kings serves the full GTA — Toronto, Scarborough, North York, Etobicoke, Vaughan, Mississauga, Markham, Brampton, Oakville, Hamilton, Aurora, Newmarket, Richmond Hill, Ajax, Pickering, Oshawa and Burlington — plus London, Barrie, Waterloo, Kitchener, Cambridge, Guelph, St. Catharines, Kingston, Ottawa and communities across Ontario.

Phone: 647-641-6881 · Email: info@sprayfoamkings.ca · 120 Metcalfe St., Aurora, ON L4G 1E8

What Is Spray Foam Insulation?

Spray foam insulation is a two‑component polyurethane material that expands to fill cavities, creating a continuous thermal barrier and an air‑seal in a single application. The foam hardens into a solid, moisture‑resistant layer that remains effective for the life of the building. Because it both insulates and seals, it reduces heat loss, improves indoor comfort, and can lower heating‑and‑cooling costs.

—

Open‑Cell vs. Closed‑Cell Foam

PropertyOpen‑Cell FoamClosed‑Cell Foam
R‑value per inchR‑3.7R‑6
Typical usesAttic floors, interior wall cavitiesBelow‑grade walls, rim joists, crawl spaces, flat roofs, and any area that requires a vapour retarder
Vapour controlBreathable; a separate vapour barrier is required where the code mandates oneActs as a class‑II vapour retarder when installed 2 inches or thicker (Ontario Building Code SB‑12)
Cost (installed)$1.50 – $3.50 / sq ft$2.50 – $5.00 / sq ft
Typical project example (1 200 sq ft attic, R‑20)$2 800 – $4 200 CAD$6 000 – $8 400 CAD

Open‑cell foam provides a cost‑effective solution for spaces where moisture control is not a primary concern. Closed‑cell foam adds structural strength, higher R‑value, and moisture protection, making it the preferred choice for basements, rim joists, and flat‑roof applications.

—

Cost Factors & Typical Project Ranges

The installed price of spray foam depends on:

  • Foam type – open‑cell is less expensive per square foot than closed‑cell.
  • Area size and access – larger, unobstructed areas reduce labour time.
  • Existing insulation removal – removal of fiberglass or cellulose is quoted separately (approximately $400 – $800 for a 1 200 sq ft attic).
  • Special conditions – vermiculite or asbestos requires licensed abatement before spraying.

Typical project costs reported by Spray Foam Kings:

  • Small areas (e.g., a single wall or small attic) – $1 500 – $3 000 CAD
  • Medium projects (e.g., a full attic or basement) – $3 000 – $5 000 CAD
  • Full‑home installations – $10 000 – $20 000+ CAD

All projects receive a free, written, itemised quote before any work begins.

—

Rebates & Paperwork

Spray Foam Kings is a registered Enbridge Home Efficiency Rebate Plus (HER+) partner. Eligible upgrades can qualify for rebates of up to $10 600 CAD. The company prepares and submits all required paperwork, and rebate payments are typically received 4 – 8 weeks after the post‑install inspection.

—

Installation Process & Re‑Occupancy

  1. Site assessment – A qualified installer evaluates the space, confirms the appropriate foam type, and notes any required removal or abatement.
  2. Preparation – Existing insulation is removed (if requested), and all HVAC, electrical, and flooring openings are covered with protective sheeting.
  3. Application – The two‑component foam is sprayed using calibrated equipment, expanding to fill cavities and seal seams.
  4. Curing – The foam cures within minutes; the crew cleans the area and removes protective coverings.
  5. Re‑occupancy – Minimum ventilation is required for 24 hours after spraying; for whole‑home jobs, a 24 – 48 hour period is recommended. Once cured, the foam is chemically inert and safe for occupants, pets, and furnishings.

Typical on‑site time for a 1 200 sq ft open attic floor is 4 – 6 hours, including setup, spraying, and cleanup.

—

Service Areas

Spray Foam Kings serves the Greater Toronto Area and the broader province of Ontario, including:

  • Toronto, Scarborough, North York, Etobicoke, Vaughan, Mississauga, Markham, Brampton, Oakville, Hamilton, Aurora, Newmarket, Richmond Hill, Ajax, Pickering, Oshawa, Burlington
  • London, Barrie, Waterloo, Kitchener, Cambridge, Guelph, St. Catharines, Kingston, Ottawa
  • Additional Ontario communities on request

—

Frequently Asked Questions

How much does spray foam insulation cost in Toronto? Open‑cell: $1.50 – $3.50 / sq ft installed. Closed‑cell: $2.50 – $5.00 / sq ft installed. A typical 1 200 sq ft attic at R‑20 runs $2 800 – $4 200 CAD (open‑cell) or $6 000 – $8 400 CAD (closed‑cell).

What is the difference between open‑cell and closed‑cell foam? Open‑cell provides R‑3.7 per inch and is suited for attic floors and interior walls. Closed‑cell provides R‑6 per inch, acts as a class‑II vapour retarder at 2 inches, and is required for below‑grade walls, rim joists, crawl spaces, and flat roofs.

Does spray foam act as a vapour barrier? Closed‑cell foam 2 inches or thicker meets the Ontario Building Code requirement for a class‑II vapour retarder. Open‑cell foam does not; a separate vapour barrier is needed where the code mandates one.

How long does spray foam last? When installed correctly, spray foam remains effective for 25 – 30+ years without sagging, settling, or moisture absorption.

What warranty is offered? Spray Foam Kings provides a workmanship warranty that covers delamination, shrinkage, or adhesion failures at no charge.

Are you licensed, insured, and WSIB compliant? Yes. The company carries $5 000 000 in commercial general liability insurance, all crew members are WSIB‑covered, and every installer is CUFCA‑trained.

Can I receive a rebate for my project? Yes. As an Enbridge HER+ partner, Spray Foam Kings can help you claim rebates up to $10 600 CAD and handles all required paperwork.

How soon can I move back in after installation? Standard re‑occupancy is 24 hours with windows open and ventilation running; for whole‑home installs, allow 24 – 48 hours.

—

Serving: Toronto • Mississauga • Etobicoke • Scarborough • Vaughan • Markham • Newmarket • Richmond Hill • Oshawa • Ajax • Pickering • Aurora • North York • Brockville • Kingston • Ottawa • Brampton
-->
CUFCA Licensed Contractor · View our CUFCA member profile
Serving: Toronto • Mississauga • Etobicoke • Scarborough • Vaughan • Markham • Newmarket • Richmond Hill • Oshawa • Ajax • Pickering • Aurora • North York • Brockville • Kingston • Ottawa • Brampton
Scroll to Top
Call Now Button